| 1 |
Dr.S.Madhu |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 207-211 |
Manufacturing of steering components of a race car |
| 2 |
Dr.S.Madhu |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 125-129 |
Design and analysis of steering components for a race car |
| 3 |
Dr.S.Madhu |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 96-106 |
Effects of diethyl ether on performance and emission characteristics of a diesel engine using toroidal profile bowl piston by varying injection pressure |
| 4 |
S Shyam Kumar |
Material science forum |
Nov, 2017 |
Vol. 909,pp193- 198 |
Evaluation of mechanical properties of PEEK HAp bio-composite used in load bearing bone implants |
| 5 |
Dr K Ashok Reddy |
International Journal of Mechanical Engineering and Technology, |
July, 2017 |
Vol. 8 issue 7 pp. 397-404 |
Heat Transfer Enhancement Studies Of Copper Oxide Nano Fluids in a Round Pipe With Insert |
| 6 |
Dr K Ashok Reddy |
International Journal of Mechanical Engineering and Technology, |
August, 2017 |
Vol. 8 issue 8 pp. 293-300 |
Experimental Analysis of Convective Heat Transfer and Second Law Analysis in a Helical Coil under Turbulent Condition |
| 7 |
Dr K Ashok Reddy |
International Journal of Mechanical Engineering and Technology, |
August, 2017 |
Vol. 8 issue 8 pp. 107-116 |
Effect of Power Number on Heat Transfer Coefficients in a Helical Coil Heat Exchanger |
| 8 |
Dr K Ashok Reddy |
International Journal for Research Trends and Innovation |
August, 2017 |
Vol. 2 issue 8 pp. 108-111 |
A Comprehensive Study on Defects Parameters of Ferrous and Composite Materials Using Non Destructive Testing Methods |
| 9 |
Dr. J. Krishnaraj |
International Journal of Control Theory and Applications |
June, 2017 |
Vol. 10 (9), pp.701–705 |
A path finding mobile robot for industrial applications |
| 10 |
Dr. J. Krishnaraj |
International Journal of Civil Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 171–177 |
A Comprehensive Study on Various Welding Techniques Used for Cryogenic vessels |
| 11 |
Dr. J. Krishnaraj |
International Journal of Civil Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 543-549 |
Mini CNC 2D Sketcher for Accurate Building Drawing |
| 12 |
Dr. J. Krishnaraj |
International Journal of Civil Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 882–890 |
Influence of Vegetable Oil Based Cutting Fluids On Tool Wear and Surface Roughness In Milling En8 Steel Using HSS and Tungsten Carbide tools |
| 13 |
Dr. J. Krishnaraj |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 704–713 |
Performance and Emission Analysis of CI Engine Fuelled with the Blends of Palm Methyl Esters and Diesel |
| 14 |
Dr. J. Krishnaraj |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol. 8(7), pp. 115–121 |
Optimization of Surface Roughness of Ti-6al-4v Titanium Alloy Using Taguchi Technique |
| 15 |
Dr. J. Krishnaraj |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. 8(7), pp. 181–188 |
A Mecanum Wheel Based Robot Platform for Warehouse Automation |
| 16 |
Dr. J. Krishnaraj |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. 8(7), pp. 225–230 |
Experimental Analysis of Calophyllum Inophyllum Biodiesel Blends On Variable Compression Ratio Diesel Engine |
| 17 |
Dr. J. Krishnaraj |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol. 8(7), pp. 503–514 |
Evaluation of Joint Properties of Friction Stir Welded Al/Cu Bimetallic Lap joints |
| 18 |
Dr. L.Venugopal |
International Journal of Mechanical Engineering and Technology |
2017, July |
Vol. 8, Issue 7, pp.166-171 |
Experimental Investigation On Hemp And Sandwich Fiber Composites For Delamination During Drilling Operation |
| 19 |
Dr. L.Venugopal |
International Journal of Civil Engineering and Technology |
2017,July |
Vol. 8, Issue 7, pp. 601-612 |
Design And Analysis Of Two Different Modified Trucks Using CFD |
| 20 |
Dr. S. Karthikayan |
International Journal of ChemTech Research |
2017 |
Vol.10 No.14, 2017, pp 117-130. |
A Review on Carbon Monoxide Emission: Formation Measurement and Control Strategies |
| 21 |
Dr. S. Karthikayan |
ARPN Journal of Engineering and Applied Sciences |
2017 |
Vol. 13, No. 1, 2018, 386-390 |
Investigation On Performance And Emission Characteristics Of Diesel Engine With The Blends Of Rosemary Oil With Magnesium Oxide |
| 22 |
Dr. E. Sivakumar |
International Journal of Ambient Energy |
2017 |
Vol. 38 , Issue. 2,186-192 |
Performance and Emission Characteristics of a LHR Engine using Nerium biodiesel and its blends |
| 23 |
Dr. E. Sivakumar |
Biofuel |
2017 |
Vol. 8, No. 2, 235–241 |
Performance And Emission Characteristics Of Using Sea Lemon Biodiesel With Thermal Barrier Coatingin A Direct- Injection Diesel Engine |
| 24 |
Dr. E. Sivakumar |
International Journal of Mechanical Engineering and Technology |
2017 |
Vol. 8 Issue 7, 0976-6340 |
Effect of Diethyl Ether (DEE) On the performance and emission characteristics of a LHR engine using Papaya Methyl Ester- Eucalyptus Oil Blend |
| 25 |
Dr. E. Sivakumar |
International Journal of Mechanical and Production Engineering Research and Development |
2017 |
Vol. 7, Issue: 6, 2249-6890 |
Study Of Performance And Emission Analysis Of Dual Biodiesel Fuelled On LHR Diesel Engine Supported By EGR system |
| 26 |
N. Prabhu Kishore |
International Journal of Civil Engineering and Technology |
17-Apr |
Vol. 8 Issue 4,pp. 278–286 |
Performance Comparison of GFRP Composite I Section With An Aluminium I section |
| 27 |
N. Prabhu Kishore |
International Journal of Civil Engineering and Technology |
17-May |
Vol. 8 Issue 5,pp.86-93 |
Improving The Performance Of 21st Century Learner By Planning Session Planner-A Case study |
| 28 |
N. Prabhu Kishore |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol. 8 Issue 6,pp. 117-124 |
Quality Research Publications – A Key Differentiator In India Rankings 2017 |
| 29 |
N.Prabhu Kishore |
International Journal of Mechanical Engineering and Technology |
17-Jul |
Vol. 8 Issue 7,pp. 190-198 |
Comparison Of Performance Of Conic And Ramp Inlet Using CFD |
| 30 |
N.Anuradha |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol. 8 issue 6 pp. 615-621 |
Effect of tool pin profile and optimization of process parameters on 6061 by friction stir welding using Taguchi method |
| 31 |
N.Anuradha |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol. 8 issue 6 pp. 722-728 |
Microstructural Studies Of Magnesium ZE41 Rare Earth Alloy Using SEM |
| 32 |
N.Anuradha |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol. No: 8, Issue No: 7, ,pp 490-495 |
Experimental Analysis Of Friction Stir Welding On Dissimillar Al And brass alloys |
| 33 |
N.Anuradha |
International Journal of Mechanical and Production Engineering Research and Development |
Feb, 2017 |
Vol. 8,Issue 1, |
Fatigue Analysis Of Pulley By Using Finite Element Analysis |
| 34 |
C Sailaja |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol. 8 Issue 6 pp. 615-621 |
Effect of tool pin profile and optimization of process parameters on 6061 by friction stir welding using Taguchi method |
| 35 |
C Sailaja |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
vol 8 issue 6 pp. 722-728 |
Microstructural Studies Of Magnesium ZE41 Rare Earth Alloy Using SEM |
| 36 |
G Aanada Rao |
International Journal of Civil Engineering and Technology |
17-Jun |
Vol. 8, Issue 6 & PP. 109-124 |
Development Of Bio Mass Gasification For Thermal Applications |
| 37 |
G Aanada Rao |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol. 8, Issue 7 & PP. 462-473 |
Design And Development Of Acoustic Refrigeration System |
| 38 |
G Aanada Rao |
International Journal of Civil Engineering and Technology |
17-Jul |
Vol. 8, Issue 7 & PP. 581-591 |
Freeze Lining In Furnace A Heat Transfer Model Using Finite Deference Method And Mat Lab |
| 39 |
G Aanada Rao |
International Journal of Mechanical Engineering & Technology |
17-Jul |
Vol. 8, Issue 7 & PP. 714-724 |
Design Of Concentrated Parabolic Dish Collector For Vapour Absorption regfrigeration system |
| 40 |
Bridjesh P. |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 207-211 |
Manufacturing Of Steering Components Of A Race Car |
| 41 |
Bridjesh P. |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 125-129 |
Design And Analysis Of Steering Components For A Race Car |
| 42 |
Bridjesh P. |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8(6), pp. 96-106 |
Effects Of Diethyl Ether On Performance And Emission Characteristics Of A Diesel Engine Using Toroidal Profile Bowl Piston By Varying Injection pressure |
| 43 |
Bridjesh.P |
International journal of chemtech research |
April, 2017 |
Vol. 10(3), pp. 225-228 |
Design Of Chain Differential For A Race Car |
| 44 |
A.Sreenivasa Rao |
International Journal of Mechanical and Mechatronics Engineering |
17-Apr |
Vol. 17, Issue02, PP 46-53 |
Development Of Cutting Force Model By FEM Approach And Experimental Investigation Of Tool Wear For CNC End Milling In Machining Of Titanium Alloy Ti- |
| 45 |
A.Sreenivasa Rao |
International Journal of Civil Engineering and Technology |
17-Jul |
Vol. 08, Issue 07, PP457-468 |
A Study On Machining Characteristics In Milling Of Ti-6Al-4V Using Experimental And Finite Element analysis |
| 46 |
K.Sudhakara Reddy |
International Journal of advanced science and technology |
July,2017 |
Vol.05,Issue07 |
Finite Element Analysis Of Shock Absorber Using ANSYS |
| 47 |
K. Chinna Maddaiah |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8, Issue 6 |
Modelling And Structural Analysis Of A GO- KART vehicle chassis frame |
| 48 |
K. Chinna Maddaiah |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol. 8, Issue 6 |
Development Of An Open Types CNC System For 3-Axis Micro CNC Machines |
| 49 |
K. Chinna Maddaiah |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. 8, Issue 6 |
Development Of Andro Humanoid Robot Arm |
| 50 |
Subramanyam B |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol.: 8, Issue: 6, Pages: 125-129 |
Design And Analysis Of Steering Components For A Race Car |
| 51 |
Subramanyam B |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol.: 8, Issue: 6, Pages: 125-129 |
Manufacturing Of Steering Components For A Race Car |
| 52 |
Subramanyam B |
International Journal of Mechanical Engineering and Technology |
17-Aug |
Vol.: 8, Issue: 8, Pages: 1430-1440 |
Thermodynamic Property Functions Of NH3-H2O Mixture |
| 53 |
Sandeep kumar K |
International Journal of Mechanical Engineering and Technology |
17-Jul |
Vol. :8,Isue:7, Pages:125-132 |
Experimental Investigation On CI Engine Fuelled With The Blends Of Olive Oil Methyl Ester And Diesel |
| 54 |
Sandeep kumar K |
International Journal of Mechanical Engineering and Technology |
17-Jun |
Vol. :8,Isue:6, Pages:704-713 |
Performance And Emission Analysis Of Ci Engine Fuelled With The Blends Of Palm Methyl Esters and Diesel |
| 55 |
Sandeep kumar K |
International Journal of Mechanical Engineering & Technology |
17-May |
Vol. :8,Isue:5, Pages:1084-1091 |
Effect Of Mahua Oil Methyl Ester With Additive As An IC Engine Fuel In Combination With Diesel In CI Engine: An Experimental investigation |
| 56 |
S Navya Sree |
International Journal of Mechanical Engineering and Technology |
2017, July |
Vol 3, Issue1, pp 490-497 |
Performance And Emission Characteristics 4- Stroke Diesel Engine Using Used Transformer Oil |
| 57 |
S Navya Sree |
International Journal of Mechanical Engineering and Technology |
2017, July |
Vol 8, Issue7, pp 1144-1158 |
Design And Control Of Standalone Solar Photovoltaic Powered Air Cooling system |
| 58 |
S. Navya Sree |
International Journal of Civil Engineering and Technology |
2017, July |
vol 8, issue 7, pp.332-339 |
Performance And Emission Characteristics Of Variable Compression Ratio Diesel Engine Fuelled With Waste Plastic Oil And Dimethyl Carbonate |
| 59 |
A.Nalini Deepthi |
International Journal of Civil Engineering and Technology |
July2017, |
Vol. 8, Issue 7 |
A Review On Sub Zero Heat treatment On D2 Steels |
| 60 |
A.Nalini Deepthi |
International Journal of Civil Engineering and Technology |
17-Jul |
Vol. 08, Issue 7 |
Analyzing The Metallic Foam-Filled Triple Tube Concentric Heat Transfer |
| 61 |
A.Nalini Deepthi |
International Journal of Mechanical Engineering and Technology |
17-Jul |
Vol. 8, Issue 6 |
A Case Study On Design Of Mechanical Ploughing Cycle |
| 62 |
Taj |
International Journal of Civil Engineering and Technology |
17-Jul |
Vol. 8, Issue 7, |
Fabrication Of Pneumatic Pick And Place Robot |
| 63 |
Taj |
International Journal of Civil Engineering and Technology |
17-Jul |
Vol. 8, Issue 7, |
A Review On Sub Zero Heat treatment On D2 Steels |
| 64 |
Taj |
International Journal of Mechanical Engineering and Technology |
May, 2017 |
Vol. 8, Issue 6, pp.789-795 |
Finite Element Modelling And Analysis Of Hip Joint Prosthesis With Modular Stems |
| 65 |
K. Shravan kumar |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol 8, Issue 7, pp. 574-580 |
Experimental Investigation On Spot Welding Of Mild, Cold Rolled Steel And Galvanized Iron Sheets |
| 66 |
K. Shravan kumar |
International Journal of Civil Engineering and Technology |
May, 2017 |
Vol 8, Issue 5, pp. 168-174 |
Lean Manufacturing In Food And Beverage Industry |
| 67 |
K. Shravan Kumar |
International Journal of Mechanical Engineering and Technology |
2017, July |
Vol 8, Issue 7, pp. 676-684 |
Overview Of Smart Materials – Building Blocks For Sustainable Future |
| 68 |
G ARUN REDDY |
International Journal of Mechanical Engineering and Technology |
17-Jul |
Vol. 8, Issue 7 |
Modeling Of Bicycle Fitted With Two Stroke Petrol Engine |
| 69 |
G. Chandra Mohana Reddy |
International Journal Of Civil Engineering & Technology |
July, 2017 |
Vol. 8, Issue 7, pp. 714–724 |
Design Of Concentrated Parabolic Dish Collector For Vapour Absorption regfrigeration system |
| 70 |
G. Chandra Mohana Reddy |
International Journal Of Civil Engineering & Technology |
July, 2017 |
Vol. 8, Issue 7, pp. 503-514 |
Evaluation Of Joint Properties Of Friction Stir Welded Al/Cu Bimetallic Lap Joints |
| 71 |
T.N. Ravi Kanth |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. 8, Issue 7 |
Overview Of Smart Materials- Building Blocks For Sustainable Future |
| 72 |
T.N. Ravi Kanth |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. 8, Issue 6 |
A Case Study On Design Of Mechanical Ploughing Cycle |
| 73 |
J.Sreekanth Reddy |
International Journal of Civil Engineering and Technology |
June, 2017 |
Vol. 8 issue 6 |
Enhancement Of Material Properties By Reinforcement Of Natural Fibers Into glass fibre |
| 74 |
M.Anil Kumar |
International Journal of Civil Engineering and Technology |
June, 2017 |
8(6), pp. 543-549 |
Mini CNC 2D Sketcher For Accurate Building Drawing |
| 75 |
P. Kamal Kumar |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol. 8 issue 7 pp.594–600, |
Fabrication Of Pneumatic Pick And Place Robot |
| 76 |
Raghavendra. |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol. 8 issue 7 pp.993-1002 |
Experimental Analysis On Formability Of ASS304 Sheet Metal At Varying Parameters |
| 77 |
B.L.N.Krishna Sai |
International Journal of Civil Engineering and Technology |
May, 2017 |
Vol. 8, Issue 5, pp.168-174 |
Lean Manufacturing In Food And Beverage Industry |
| 78 |
B.L.N.Krishna Sai |
International Journal of Civil Engineering and Technology |
July,2017 |
Vol. 8, Issue 7, pp332-339 |
Performance And Emission Characteristics Of Variable Compression Ratio Diesel Engine Fuelled With Waste Plastic Oil And Dimethyl Carbonate |
| 79 |
B.L.N.Krishna Sai |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. No: 8, Issue No: 7,pp 379-387 |
Design And Analysis Of Heavy Trucks Using CFD |
| 80 |
B.L.N.Krishna Sai |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. No: 8, Issue No: 7,pp 490-497 |
Performance And Emission Characteristics Of 4- Stroke Diesel Engine Using Used Transformer Oil |
| 81 |
B.L.N.Krishna Sai |
International Journal of Mechanical Engineering and Technology |
August, 2017 |
Vol. 8, Issue 8, , pp. 1238–1246 |
Microstructural Behavior And Mechanical Properties Of Walking Friction Stir Spot Welding Of Commercial Pure Magnesium |
| 82 |
Eswar Chandra Prasad Nidumolu |
International Journal of Mechanical Engineering and Technology |
May, 2017 |
Vol 8, Issue 5, pp. 1084 – 1091 |
Effect Of Mahua Oil Methyl Ester With Additive As An IC Engine Fuel In Combination With Diesel In CI Engine: An Experimental investigation |
| 83 |
Eswar Chandra Prasad Nidumolu |
International Journal of Mechanical Engineering and Technology |
May, 2017 |
Vol. 8, Issue 6, pp.789-795 |
Finite Element Modeling And Analysis Of Hip Joint Prosthesis With Modular Stems |
| 84 |
Eswar Chandra Prasad Nidumolu |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
8(6), pp. 704–713 |
Performance and Emission Analysis of CI Engine Fuelled with the Blends of Palm Methyl Esters and Diesel |
| 85 |
Eswar Chandra Prasad Nidumolu |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol. 8, Issue 7, pp.125-132 |
Experimental Investigation On CI Engine Fuelled With The Blends Of Olive Oil Methyl Ester And Diesel |
| 86 |
P Geeta Krishna |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol 8, Issue 7, pp. 166-171 |
Experimental Investigation On Hemp And Sandwich Fiber Composites For Delamination During Drilling Operation |
| 87 |
P Geeta Krishna |
International Journal of Mechanical Engineering and Technology |
Jun, 2017 |
vol 8 issue 6 pp. 722-728 |
Microstructural Behavior And Mechanical Properties Of Walking Friction Stir Spot Welding Of Commercial Pure Magnesium |
| 88 |
P Geeta Krishna |
International Journal of Mechanical Engineering and Technology |
May, 2017 |
Vol. 8, Issue 6, pp.789-795 |
Finite Element Modeling And Analysis Of Hip Joint Prosthesis With Modular Stems |
| 89 |
P Geeta Krishna |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol 8, Issue 7, pp. 410-420 |
Analysis Of A Condenser In A Thermal Power Plant For Possible Augmentation In Its Heat Transfer |
| 90 |
P Geeta Krishna |
International Journal of Mechanical Engineering and Technology |
June, 2017 |
Vol 8, Issue 6, pp. 804-812 |
CFD Analysis Of Pulsating Heat Pipe Using Different Fluids |
| 91 |
T Monica |
International Journal of Civil Engineering and Technology |
July, 2017 |
Vol 8, Issue 7, pp. 601-612 |
Design And Analysis Of Two Different Modified Trucks Using CFD |
| 92 |
T Monica |
International Journal of Mechanical Engineering and Technology |
July, 2017 |
Vol 8, Issue 7, pp. 379-387 |
Design And Analysis Of Heavy Trucks Using CFD |
| 93 |
T Monica |
International Journal of Civil Engineering and Technology |
April, 2017 |
Vol 8. Issue 4, pp. 313-324 |
Experimental Investigation On Variable Compression Ratio Diesel Engine Fuelled With Mahua Oil And Diesel blends |
| 94 |
L.Praveen |
International Journal of Civil Engineering and Technology |
2017, July |
Vol 8, Issue 7, pp. 594-600 |
Fabrication Of Pneumatic Pick And Place Robot |
| 95 |
S Girish |
International Journal of Mechanical Engineering and Technology |
2017, July |
Vol 8, Issue 6, pp. 804-812 |
CFD Analysis Of Pulsating Heat Pipe With Different Fluids |
| 96 |
S Girish |
International Journal of Mechanical Engineering and Technology |
2017, July |
Vol 8, Issue 7, pp. 379-387 |
Design And Analysis Of Heavy Trucks Using CFD |
| 97 |
S Girish |
International Journal of Scientific Development and Research |
2017, July |
Vol 2, Issue 7, pp. 331-334 |
Design And Fabrication Of A Indexing Drill Jig Using Pro/E Wildfire 4.0 And MATLAB |
| 98 |
S Girish |
International Journal of Scientific Development and Research |
2017, July |
Vol 2, Issue 7, pp. 220-222 |
Enhancement Techniques Of Double Pipe Heat Exchanger |
| 99 |
S Girish |
International Journal of Civil Engineering and Technology |
2017, July |
Vol 2, Issue 7, pp. 410-420 |
Analysis Of A Condenser In A Thermal Power Plant For Possible Augmentation In Its Heat Transfer Performance |
| 100 |
M.Mahender Reddy |
International Journal of Mechanical Engineering and Technology |
2017, |
Vol 8, Issue 8, pp293-300 |
Experimental Analysis of Convective Heat Transfer and Second Law Analysis in a Helical Coil under Turbulent Condition |
| 101 |
P.Sunil kumar |
international Journal of Mechanical Engineering and Technology |
2017,August |
Vol8,issue8,pp107- 116 |
Effect Of Power Number On Heat Transfer Rate In Helical Coil Under Turbulent Flow |
| Conference Publications |
| 1 |
Dr K Ashok Reddy |
Materials Today: Proceedings |
August, 2017 |
Vol. 4 issue 8 pp. 7302-7312 |
Non-Destructive Testing, Evaluation Of Stainless Steel materials |
| 2 |
Dr K Ashok Reddy |
Materials Today: Proceedings |
August, 2017 |
Vol. 4 issue 8 pp. 7313-7334 |
A Critical Review On Acoustic Methods & Materials Of A Muffler |
| 3 |
Dr. S. Karthikayan |
Material Today: Proceeding |
2017 |
Vol. 4, Issue 8, pp. 9004-9012 |
Innovative Research Trends In The Application Of Thermal Barrier Metal Coating In Internal Combustion engines |
| 4 |
Dr. S. Karthikayan |
Material Today: Proceeding |
2017 |
Vol. 4, Issue 8,pp. 7903-7910 |
Combustion Simulation And Emission Prediction Of Different Combustion Chamber Geometries Using Finite Element Method |
| 5 |
Dr. S. Karthikayan |
Material Today: Proceeding |
2017 |
Vol. 4, Issue 2, Part A, 693-700 |
Investigation On Reverse Characteristics Of Centrifugal Pump In Turbine Mode: A Comparative Study By An Experimentation and simulation |
| 6 |
Taj |
Material Today: Proceeding |
Nov, 2017 |
Issue 8, 2017, Pages 7903-7910. |
Microstructure Based Finite Element Analysis For Deformation Behavior Of Mg Based Composites |
| 7 |
P Geeta Krishna |
Materials Today: Proceedings (Elsevier) |
Oct, 2017 |
Vol. 4, Issue 8, pp. 8478-8485 |
Experimental Investigation Of Failures In Redrawing Of Ti-6Al-4V Alloy At Warm Conditions |
