| 1 |
Dr. S. Karthikayan |
SAE International Technical papers |
18-Jul |
Vol. 28-0072 |
Combustion and Emission Behaviour study of Non Edible Vegetable Bio Fuel as Sole Fuel in Disel Engine |
| 2 |
Dr. S. Karthikayan |
SAE International Technical papers |
18-Jul |
Vol. 28-0071 |
Recent Trends in Energy Conversion Using Thermoelectric Generators: Techniques and Methods |
| 3 |
Dr. S. Karthikayan |
ARPN Journal of Engineering and Applied Sciences |
2018 – Jan |
Vol. 13, No. 1, 386-390 |
Investigation on performance and emission characteristics of Diesel Engine with the blends of Rosemary oil with magnesium oxide |
| 4 |
Dr. E. Sivakumar |
International Journal of Mechanical and Production Engineering Research and Development |
18-Feb |
Vol. 8(1), pp. 127- 132 |
Comparison of wall temperatures on scramjet inlets at hypersonic velocities |
| 5 |
Dr. E. Sivakumar |
Journal of the Balkan Tribological Association |
18-Dec |
Vol. 24, No. 4. pp. 870-886 |
Impact of thermal barrier coating on operating characteristics of diesel engine fueled by waste plastic oil |
| 6 |
G. Ananda rao |
International Journal of Mechanical and Production Engineering Research and Development |
18-Feb |
Vol. 8(1), pp. 429- 436 |
Multi response objective optimization of friction stir welding parameters of dissimilar metals of aa 6061 aluminumand is319 brass joining through taguchi’s Method |
| 7 |
N.Prabhu Kishore |
International Journal of Mechanical and Production Engineering Research and Development |
2018-April |
Vol. 8, No.2, 857-864 |
Performance Analysis of Diesel Engine using Hazel Nut Biodiesel with Antoxidants |
| 8 |
N.Prabhu Kishore |
International Journal of Mechanical and Production Engineering Research and Development |
2018-April |
Vol. 8, No.2, 857-864 |
Performance Analysis of Diesel Engine using Hazel Nut Biodiesel with Antoxidants |
| 9 |
N.Prabhu Kishore |
International Journal of Mechanical and Production Engineering Research and Development |
2018-Feb |
Vol. 8, No.1, 27-34 |
Application of ARCS Model and Motivational Design in Engineering Subjects – A Case Study |
| 10 |
N. Anuradha |
International Journal of Mechanical and Production Engineering Research and Development |
2018-Feb |
Vol. 8, No.1, 101-104 |
Fatigue Analysis of Pulley, by using Finite Element Analysis |
| 11 |
N. Anuradha |
International Journal of Mechanical and Production Engineering Research and Development |
2018-Feb |
Vol. 8, No.1, 93-100 |
Thermo structural analysis of Structural Plates |
| 12 |
Bridjesh P. |
Sustainable Environment Research |
2018 |
Vol. 28, 142-147 |
MEA and DEE as additives on diesel engine using waste plastic oil diesel blends |
| 13 |
Bridjesh P. |
SAE Technical Papers |
18-Jul |
Vol. 28-0018 |
Selection of Optimum Blend of Waste Plastic Oil- Diesel Blends Adapting Combinatorial Mathematics Based Approach |
| 14 |
Bridjesh P. |
International Journal of Mechanical and Production Engineering Research and Development |
2018-April |
Vol. 8, No.2, 857-864 |
Performance Analysis of Diesel Engine using Hazel Nut Biodiesel with Antioxidants |
| 15 |
Bridjesh P. |
International Journal of Mechanical and Production Engineering Research and Development |
2018-April |
Vol. 8, No.2, 1243-1248 |
Effect of Emulsifies on Performance and Emission characteristics of Diesel Engine using Palm Biodiesel |
| 16 |
K. Chinna Maddaiah |
International Journal of Mechanical and Production Engineering Research and Development |
2018-Feb |
Vol. 8(1), pp. 119-126 |
Transient analysis of wind turbine blades |
| 17 |
Subramanyam B |
International Journal of Mechanical and Production Engineering Research and Development |
|
Vol. 8, No.2, 1243-1248 |
Effect of Emulsifies on Performance and Emission characteristics of Diesel Engine using Palm Biodiesel |
| 18 |
Subramanyam B |
International Journal of Mechanical and Production Engineering Research and Development |
2018-Feb |
Vol. 8(1), pp. 487-494 |
Influence of fiber orientation on the properties of composites |
| 19 |
Limbadri K |
Metallography, Microstructure, and Analysis |
2018 |
Vol. 7(4), pp. 421-433 |
Orientation- Dependent Tensile Flow Behavior of Zircaloy-4 at Room Temperature |
| 20 |
Chandra Mohana Reddy G |
International Journal of Mechanical and Production Engineering Research and Development |
18-Feb |
Vol. 8(1), pp. 429-436 |
Multi response objective optimization of friction stir welding parameters of dissimilar metals of a 6061 aluminum and is319 brass joining through Taguchi’s method |
| 21 |
Chandra Mohana Reddy G |
International Journal of Mechanical and Production Engineering Research and Development |
2018-April |
Vol. 8, No.2, 1243-1248 |
Effect of Emulsifies on Performance and Emission characteristics of Diesel Engine using Palm Biodiesel |
| 22 |
Dr. J.Krishnaraj |
International Journal of Industrial and Systems Engineering |
Apr-19 |
Vol. 31, No.4, 425-451 |
Simulated Annealing algorithms to minimize the completion time variance of jobs in permutation flowshops |
| Conference Publications |
| 1 |
Dr. L.Venugopal |
IOP Conf. Series: Materials Science and Engineering |
2018 |
Vol. 330(1) |
Simulation studies on Tube End Expansion of AA2014 Alloy Tubes |
| 2 |
Praveen L |
IOP Conf. Series: Materials Science and Engineering |
2018 |
Vol. 330(1), |
machining with reverse polarity |
| 3 |
Praveen L |
IOP Conf. Series: Materials Science and Engineering |
2018 |
Vol. 330(1) |
Simulation studies on Tube End Expansion of AA2014 Alloy Tubes |
| 4 |
Limbadri K |
Materials Today: Proceedings |
2018 |
Vol. 5(2), pp. 3793-3801 |
Stress Variation of Zircaloy-4 and Johnson Cook Model for rolled sheets |
| 5 |
Geeta Krishna P |
IOP Conf. Series: Materials Science and Engineering |
2018 |
Vol. 330(1) |
Simulation studies on Tube End Expansion of AA2014 Alloy Tubes |
| 6 |
Geeta Krishna P |
IOP Conf. Series: Materials Science and Engineering |
2018 |
Vol. 330(1) |
Effects of pulse on and off time and electrode types on the material removal rate and tool wear rate of the Ti-6Al-4V Alloy using EDM machining with |
| 7 |
Dr. J. Krishnaraj |
IOP Conf. Series: Materials Science and Engineering |
Apr-19 |
Vol. 455, 012132 |
Modelling and Analysis of exhaust manifold using CFD |
