A. Sai Kumar

Papers Published

List of Publications

2025

• Kumar, R. R., Karthik, K., Elumalai, P. V., Masilamani, N., Saikumar, A., & Cherie, A. (2025). Exhaust manifold performance enhancement using nano fluids a design and CFD investigation for four stroke petrol engines. Scientific reports, 15(1), 20443.
• Madhukar, G., Ramu, P., Virajitha, T., Jyothi, N., Lanage, R., & Saikumar, A. (2025, September). An effective and safe method for estimating depth and segmenting pixels in self-driving automobiles. In AIP Conference Proceedings (Vol. 3342, No. 1, p. 060033). AIP Publishing LLC.
• Haribabu, M., Krishna, Y. K., Kanan, M., Saikumar, A., RJ, A., & Shankar, S. V. (2025, August). Clinical Applicability for Binary Glaucoma Classification and Detection Using Deep Learning and Meta-Heuristic Optimization Method. In 2025 International Conference on Recent Innovation in Science Engineering and Technology (ICRISET) (pp. 1-7). IEEE.

 

2024

• Harika, C., Sai Kumar, A., & Raghavendra Rao, M. V. (2024). Comparative study on effect of material on structural performance of a quadcopter drone with ‘X- frame’. Journal of Physics: Conference Series, 2837(1).
• Prasad, T., Srinivasa Reddy, K., Kunda, A., Durga, J. M., & Sai Kumar, A. (2024). A study on the bending strength of ultra double-sided polypropylene arc welded using stainless steel sheets. Journal of Physics: Conference Series, 2837(1).
• Ranjit, P. S., Ahmed, Z., Bhurat, S. S., Alur, V. B., Venkatesan, E. P., Samuel, O. D., Enweremadu, C., Kumar, A. S., & Sekar, P. (2024). Comprehensive comparative study of the durability wear assessment of a diesel engine fuelled with Jatropha seed oil and diesel fuel and its troubleshooting and scheduled maintenance. ACS Omega, 9(43), 43331–43352. https://doi.org/10.1021/acsomega.4c00204
• Saritha, K., Sharma, S., Dutt, A., Shrivastava, A., Kakoli Rao, A., Haider Jawad, A., & Saikumar, A. (2024). Green energy storage solutions: A research. E3S Web of Conferences, 552, 01129. https://doi.org/10.1051/e3sconf/202455201129
• Vivek, R., Lalith Surya, B., Kishore, A. T., Jai Akash, S., & Saikumar, A. (2024). “effortless hydration: Exploring automatic water dispensers”. Journal of Physics: Conference Series, 2837(1).

2023

• Dharshini, J. I. P., Kumar, A. N., Prabhu, G., Bala, V. V., Viknesh, T., & Kumar, A. S. (2023). Design and fabrication of automatic emergency braking system. AIP Conference Proceedings, 2492.
• Easwer, D., Manideep, B., & Kumar, A. S. (2023). “numerical simulation of a blunt body to investigate drag characteristics with active and passive device”. AIP Conference Proceedings, 2492.
• Ghaffar, I., Deepanraj, B., Sundar, L. S., Vo, D.-V. N., Saikumar, A., & Hussain, A. (2023). A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels. Chemosphere, 311.
• Konda, S. K., & Sai Kumar, A. (2023). High-speed aerodynamic analysis of a ducted re-entry vehicle. AIP Conference Proceedings, 2492.
• Kumar, A. S., Ganesh, M., & Mishra, N. K. (2023). Modelling and CFD analysis of supercritical airfoil with slotted flap at various flight segments. AIP Conference Proceedings, 2492.
• Kumar, A. S., Mishra, N. K., Ganesh, M., & Swethabala, M. N. V. S. G. (2023). Design and fabrication of blended wing body UAV. AIP Conference Proceedings, 2492.
• Rakeshkumar, C., Surenderpaul, A., Naveen, R., & Sai Kumar, A. (2023). Effect of chemical treatment on mechanical properties of prosopis juliflora fibre and glass fiber with nano fillers. Materials Today: Proceedings.
• Saravanan, R., Malladi, A., Amuthan, T., Aneesh, V. N., Jerin, A., Anbuchezhiyan, G., & Saikumar, A. (2023). Mechanical characterization of friction stir welded dissimilar aluminium alloy using Taguchi approach. Materials Today: Proceedings.
• Subramani, N., Sangeetha, M., Gowtham, G., & Sai Kumar, A. (2023). Flow and acoustic characteristics of convergent-divergent nozzle with and without wedges. Materials Today: Proceedings.
• Swetha Bala, M. N. V. S., Kalali, S. K. G., Goud, B. N., Kumar, A. S., & Gupta, M. S. (2023). Flow investigation of a multiple winglet wing model. AIP Conference Proceedings, 2492.

2022

• Gandla, V. S. B., Mishra, N. K., Algam, S. K., Yadav, V., & Kancharla, L. R. (2022). Design of a canard-wing UAV. Graduate Research in Engineering and Technology, 74–81. https://doi.org/10.47893/gret.2022.1052
• Mishra, N. K., Kumar, A. S., Shashank, B., Vamsi, K. S., Annem, S., Rao, B. D., & Sundararaj, K. (2022). Numerical investigation of a finite wing section with a bleed hole allowing boundary layer suction. AIP Conference Proceedings, 2446.
• Satyanarayana Gupta, M., Shravan Koundinya, V., Phani Babu Vemuri, V., Sai Kumar, A., Venkata Rambabu, G., & Ganesh, M. (2022). Field study of remote controlled Agrobot. Materials Today: Proceedings, 64, 865–869.

2021

• Kumar, A. S., Hardik, L. G., Kumar, D. K., Ramya, B., & John, T. (2021). Conceptual design of UAV using modular approach. AIP Conference Proceedings, 2317.
• Kumar, A. S., Shivaleela, M., Srilekha, L., & Sruthi, B. (2021). Flow field analysis of rudder in CFD. AIP Conference Proceedings, 2317.

2019

• Design and analysis of UAV for high payload. (2019). International Journal of Innovative Technology and Exploring Engineering, 9(2), 3733–3736. https://doi.org/10.35940/ijitee.b6694.129219
• Design and development of man portable back packable multi-purpose drone. (2019). International Journal of Engineering and Advanced Technology, 9(2), 1–4. https://doi.org/10.35940/ijeat.b3038.129219
• Design of minimum length supersonic nozzle using the method of characteristics. (2019). International Journal of Innovative Technology and Exploring Engineering, 9(2), 1370–1374. https://doi.org/10.35940/ijitee.b6183.129219

2018

• Ganesh, M., & Sai Kumar, A. (2018). Design of airship for aerial surveillance and communication using knowledge based engineering. International Journal of Mechanical and Production Engineering Research and Development, 8(1), 17–26.
• Kumar, K. S., Kumar, B. S., Sai Kumar, A., & Reddy, N. M. (2018). Enhancement of heat transfer in the double pipe heat exchanger using different twisted tapes. IOP Conference Series: Materials Science and Engineering, 455(1).
• Sai Kumar, A., & Ganesh, M. (2018). Evaluation of effect of shape and length of spike on aerodynamics performance of supersonic axi-symmetric bodies. International Journal of Mechanical and Production Engineering Research and Development, 8(1), 133–144.

2017

• Ganesh, M., Bindu, G. H., & Kumar, A. S. (2017). Modeling and analysis of a composite wing for missile structure. International Journal of Mechanical Engineering and Technology, 8(6), 338–347.
• Ganesh, M., & Sai Kumar, A. (2017). Modeling, analysis and fabrication of a piston engine crank shaft. International Journal of Civil Engineering and Technology, 8(5), 368–377.
• Kumar, A. S., Ganesh, M., & Bindu, G. H. (2017). Application of CNC milling in manufacturing turbine blades. International Journal of Civil Engineering and Technology, 8(5), 801–808.

2015

• Anoop, B. V. S., Vineeta, T. V., Kumar, A. S., & Bharadwaj, V. V. S. N. (2015). Conceptual design of hybrid UAV.
• Kumar, B. D., Singh, R., & Sai Kumar, A. (2015). Design and CFD analysis of gas turbine engine chamber. IJSR, 4(7), 250–257.
• Sai Kumar, A., & Avinash Vamsi Krishna, C. B. (2015). Conceptual design of hybrid UAV. International Journal of Engineering Research & Technology, 4(12), 26–32.
• Shiva Shankar, K., Shailesh Babu, S., & Sai Kumar, A. (2015). Thermo-structure analysis of dual-bell nozzle. International Journal of Engineering and Innovative Technology, 4(11), 292–299.

2014

• Goud, T. S. K., Sai Kumar, A., & Prasad, S. S. (2014). Analysis of fluid-structure interaction on an aircraft wing. International Journal of Engineering and Innovative Technology.
• Kumar, A., & Sai Vamsi Krishna, C. (2014). Magneto-hydrodynamics for power generation and high speed propulsion. IJAET, 7(1), 168–175.
• Sai Kumar, A., Srinivasa Prasad, S., & Vamsi Krishna, C. (2014). Design of Pulsejet engine for UAVs. International Journal of Engineering Research & Technology, 3(9), 670–675.

2013

• Sai Kumar, A., Bhaskar Reddy, P. C., & Vamsi Krishna, C. (2013). Design and fabrication of 150 mm fixed wing MAV. International Journal of Science & Technology, 3(3), 15–23.

• Chowduru, V. K., Kumar, A. S., & Madhu, T. M. (n.d.). Numerical investigation of fluid flows over a rotor-stator (stage) in an axial flow compressor stage.

 

Resource Person

• A one-week Faculty Development Programme on “Innovative Design Pedagogy: Mastering Fusion 360 For Educators” – at MLR Institute of Technology on 15/07/2024 to 20/07/2024.
• A One-day workshop on “Introduction to UAVs and Practical Design Tools” at Lakireddy Bal Reddy College of Engineering on 06/09/2025.
• A two-day “Hands-on Workshop on Drone Technology” at Sreyas Institute of Engineering & Technology, Hyderabad, 05/01/2026 to 06/01/2026.

 

Certifications

• Conferred by Dassault Systèmes in Solidworks Mechanical Design at Professional Level in July 2021.
• Conferred by Dassault Systèmes in Solidworks Mechanical Design at Associate Level in June 2021.
• Conferred by Indo Universal Collaboration for Engineering Education (IUCEE) for completing International Engineering Educator Certification Program in the year 2019.

List of Publications

2025

• Kumar, R. R., Karthik, K., Elumalai, P. V., Masilamani, N., Saikumar, A., & Cherie, A. (2025). Exhaust manifold performance enhancement using nano fluids a design and CFD investigation for four stroke petrol engines. Scientific reports, 15(1), 20443.
• Madhukar, G., Ramu, P., Virajitha, T., Jyothi, N., Lanage, R., & Saikumar, A. (2025, September). An effective and safe method for estimating depth and segmenting pixels in self-driving automobiles. In AIP Conference Proceedings (Vol. 3342, No. 1, p. 060033). AIP Publishing LLC.
• Haribabu, M., Krishna, Y. K., Kanan, M., Saikumar, A., RJ, A., & Shankar, S. V. (2025, August). Clinical Applicability for Binary Glaucoma Classification and Detection Using Deep Learning and Meta-Heuristic Optimization Method. In 2025 International Conference on Recent Innovation in Science Engineering and Technology (ICRISET) (pp. 1-7). IEEE.

 

2024

• Harika, C., Sai Kumar, A., & Raghavendra Rao, M. V. (2024). Comparative study on effect of material on structural performance of a quadcopter drone with ‘X- frame’. Journal of Physics: Conference Series, 2837(1).
• Prasad, T., Srinivasa Reddy, K., Kunda, A., Durga, J. M., & Sai Kumar, A. (2024). A study on the bending strength of ultra double-sided polypropylene arc welded using stainless steel sheets. Journal of Physics: Conference Series, 2837(1).
• Ranjit, P. S., Ahmed, Z., Bhurat, S. S., Alur, V. B., Venkatesan, E. P., Samuel, O. D., Enweremadu, C., Kumar, A. S., & Sekar, P. (2024). Comprehensive comparative study of the durability wear assessment of a diesel engine fuelled with Jatropha seed oil and diesel fuel and its troubleshooting and scheduled maintenance. ACS Omega, 9(43), 43331–43352. https://doi.org/10.1021/acsomega.4c00204
• Saritha, K., Sharma, S., Dutt, A., Shrivastava, A., Kakoli Rao, A., Haider Jawad, A., & Saikumar, A. (2024). Green energy storage solutions: A research. E3S Web of Conferences, 552, 01129. https://doi.org/10.1051/e3sconf/202455201129
• Vivek, R., Lalith Surya, B., Kishore, A. T., Jai Akash, S., & Saikumar, A. (2024). “effortless hydration: Exploring automatic water dispensers”. Journal of Physics: Conference Series, 2837(1).

2023

• Dharshini, J. I. P., Kumar, A. N., Prabhu, G., Bala, V. V., Viknesh, T., & Kumar, A. S. (2023). Design and fabrication of automatic emergency braking system. AIP Conference Proceedings, 2492.
• Easwer, D., Manideep, B., & Kumar, A. S. (2023). “numerical simulation of a blunt body to investigate drag characteristics with active and passive device”. AIP Conference Proceedings, 2492.
• Ghaffar, I., Deepanraj, B., Sundar, L. S., Vo, D.-V. N., Saikumar, A., & Hussain, A. (2023). A review on the sustainable procurement of microalgal biomass from wastewaters for the production of biofuels. Chemosphere, 311.
• Konda, S. K., & Sai Kumar, A. (2023). High-speed aerodynamic analysis of a ducted re-entry vehicle. AIP Conference Proceedings, 2492.
• Kumar, A. S., Ganesh, M., & Mishra, N. K. (2023). Modelling and CFD analysis of supercritical airfoil with slotted flap at various flight segments. AIP Conference Proceedings, 2492.
• Kumar, A. S., Mishra, N. K., Ganesh, M., & Swethabala, M. N. V. S. G. (2023). Design and fabrication of blended wing body UAV. AIP Conference Proceedings, 2492.
• Rakeshkumar, C., Surenderpaul, A., Naveen, R., & Sai Kumar, A. (2023). Effect of chemical treatment on mechanical properties of prosopis juliflora fibre and glass fiber with nano fillers. Materials Today: Proceedings.
• Saravanan, R., Malladi, A., Amuthan, T., Aneesh, V. N., Jerin, A., Anbuchezhiyan, G., & Saikumar, A. (2023). Mechanical characterization of friction stir welded dissimilar aluminium alloy using Taguchi approach. Materials Today: Proceedings.
• Subramani, N., Sangeetha, M., Gowtham, G., & Sai Kumar, A. (2023). Flow and acoustic characteristics of convergent-divergent nozzle with and without wedges. Materials Today: Proceedings.
• Swetha Bala, M. N. V. S., Kalali, S. K. G., Goud, B. N., Kumar, A. S., & Gupta, M. S. (2023). Flow investigation of a multiple winglet wing model. AIP Conference Proceedings, 2492.

2022

• Gandla, V. S. B., Mishra, N. K., Algam, S. K., Yadav, V., & Kancharla, L. R. (2022). Design of a canard-wing UAV. Graduate Research in Engineering and Technology, 74–81. https://doi.org/10.47893/gret.2022.1052
• Mishra, N. K., Kumar, A. S., Shashank, B., Vamsi, K. S., Annem, S., Rao, B. D., & Sundararaj, K. (2022). Numerical investigation of a finite wing section with a bleed hole allowing boundary layer suction. AIP Conference Proceedings, 2446.
• Satyanarayana Gupta, M., Shravan Koundinya, V., Phani Babu Vemuri, V., Sai Kumar, A., Venkata Rambabu, G., & Ganesh, M. (2022). Field study of remote controlled Agrobot. Materials Today: Proceedings, 64, 865–869.

2021

• Kumar, A. S., Hardik, L. G., Kumar, D. K., Ramya, B., & John, T. (2021). Conceptual design of UAV using modular approach. AIP Conference Proceedings, 2317.
• Kumar, A. S., Shivaleela, M., Srilekha, L., & Sruthi, B. (2021). Flow field analysis of rudder in CFD. AIP Conference Proceedings, 2317.

2019

• Design and analysis of UAV for high payload. (2019). International Journal of Innovative Technology and Exploring Engineering, 9(2), 3733–3736. https://doi.org/10.35940/ijitee.b6694.129219
• Design and development of man portable back packable multi-purpose drone. (2019). International Journal of Engineering and Advanced Technology, 9(2), 1–4. https://doi.org/10.35940/ijeat.b3038.129219
• Design of minimum length supersonic nozzle using the method of characteristics. (2019). International Journal of Innovative Technology and Exploring Engineering, 9(2), 1370–1374. https://doi.org/10.35940/ijitee.b6183.129219

2018

• Ganesh, M., & Sai Kumar, A. (2018). Design of airship for aerial surveillance and communication using knowledge based engineering. International Journal of Mechanical and Production Engineering Research and Development, 8(1), 17–26.
• Kumar, K. S., Kumar, B. S., Sai Kumar, A., & Reddy, N. M. (2018). Enhancement of heat transfer in the double pipe heat exchanger using different twisted tapes. IOP Conference Series: Materials Science and Engineering, 455(1).
• Sai Kumar, A., & Ganesh, M. (2018). Evaluation of effect of shape and length of spike on aerodynamics performance of supersonic axi-symmetric bodies. International Journal of Mechanical and Production Engineering Research and Development, 8(1), 133–144.

2017

• Ganesh, M., Bindu, G. H., & Kumar, A. S. (2017). Modeling and analysis of a composite wing for missile structure. International Journal of Mechanical Engineering and Technology, 8(6), 338–347.
• Ganesh, M., & Sai Kumar, A. (2017). Modeling, analysis and fabrication of a piston engine crank shaft. International Journal of Civil Engineering and Technology, 8(5), 368–377.
• Kumar, A. S., Ganesh, M., & Bindu, G. H. (2017). Application of CNC milling in manufacturing turbine blades. International Journal of Civil Engineering and Technology, 8(5), 801–808.

2015

• Anoop, B. V. S., Vineeta, T. V., Kumar, A. S., & Bharadwaj, V. V. S. N. (2015). Conceptual design of hybrid UAV.
• Kumar, B. D., Singh, R., & Sai Kumar, A. (2015). Design and CFD analysis of gas turbine engine chamber. IJSR, 4(7), 250–257.
• Sai Kumar, A., & Avinash Vamsi Krishna, C. B. (2015). Conceptual design of hybrid UAV. International Journal of Engineering Research & Technology, 4(12), 26–32.
• Shiva Shankar, K., Shailesh Babu, S., & Sai Kumar, A. (2015). Thermo-structure analysis of dual-bell nozzle. International Journal of Engineering and Innovative Technology, 4(11), 292–299.

2014

• Goud, T. S. K., Sai Kumar, A., & Prasad, S. S. (2014). Analysis of fluid-structure interaction on an aircraft wing. International Journal of Engineering and Innovative Technology.
• Kumar, A., & Sai Vamsi Krishna, C. (2014). Magneto-hydrodynamics for power generation and high speed propulsion. IJAET, 7(1), 168–175.
• Sai Kumar, A., Srinivasa Prasad, S., & Vamsi Krishna, C. (2014). Design of Pulsejet engine for UAVs. International Journal of Engineering Research & Technology, 3(9), 670–675.

2013

• Sai Kumar, A., Bhaskar Reddy, P. C., & Vamsi Krishna, C. (2013). Design and fabrication of 150 mm fixed wing MAV. International Journal of Science & Technology, 3(3), 15–23.

• Chowduru, V. K., Kumar, A. S., & Madhu, T. M. (n.d.). Numerical investigation of fluid flows over a rotor-stator (stage) in an axial flow compressor stage.

Resource Person

• A one-week Faculty Development Programme on “Innovative Design Pedagogy: Mastering Fusion 360 For Educators” – at MLR Institute of Technology on 15/07/2024 to 20/07/2024.
• A One-day workshop on “Introduction to UAVs and Practical Design Tools” at Lakireddy Bal Reddy College of Engineering on 06/09/2025.
• A two-day “Hands-on Workshop on Drone Technology” at Sreyas Institute of Engineering & Technology, Hyderabad, 05/01/2026 to 06/01/2026.

Certifications

• Conferred by Dassault Systèmes in Solidworks Mechanical Design at Professional Level in July 2021.
• Conferred by Dassault Systèmes in Solidworks Mechanical Design at Associate Level in June 2021.
• Conferred by Indo Universal Collaboration for Engineering Education (IUCEE) for completing International Engineering Educator Certification Program in the year 2019.

Copy Rights

• “Solution for the One-Dimensional Wave Equation” -06/12/2024
• “Transform The Algebraic Grid to Elliptic Grid” -29/10/2024
• To evaluate Temperature distribution due to heat conduction in a composite material over a given time period and plot it. – 29/10/2024

Consultancy Projects

• “Development of Single cot”- VR Engineering Works (3 Months Duration) estimated cost Rs.147500

Seed Money Received

• “Modular Design Approach for Quick Assembly of UAV Components”- Rs.1,00,000.

List of FDPs Attended

• Design Thinking for Next Generation AI Solutions – 17/11/2025 to 22/11/2025, conducted by AICTE Training and Learning (ATAL) Academy, Gurukula Kangri Vishwavidyalaya, Haridwar
• Reimagining Media Education: The Role of Artificial Intelligence in Transforming Educational Practices- 07/07/2025 to 13/07/2025, Sri Ramswaroop Memorial University.
• “Unmanned Air Vehicles and Drone Technology” at Maturi Venkata Subba Rao Engineering College from 27/01/2025 to 01/02/2025.
• “DevOps for Cloud Native Development: Containers, Kubernetes and CI/CD Pipelines” at Sri Venkateshwara College of Engineering and Technology from 03/02/2025 to 08/02/2025
• “3D Printing and Design for Academicians & Entrepreneur” from 21-06-2021 to 25-06-2021 conducted by AICTE Training and Learning (ATAL) Academy at S R Engineering College.
• ” Fundamentals of Electric Vehicle Technology” from 06/12/2021 to 10/12/2021 conducted by AICTE Training and Learning (ATAL) Academy at IIIT Bhagalpur.
• “Technology-Based Entrepreneurship Development Program on Drones”-24 July-19 Aug 2023, Aero MLRIT.
• “AUTODESK-FUSION 360” – organized by Malla Reddy College of Engineering and Design Labs from 10/11/2023 to 15/11/2023.
• Development of Drones – 25/04/2024 to 30/04/2024 organized by Dept of Aero, IARE.

Internships

• A two-week training on Drone Design and its Parameters – Wings and Props, Hyderabad.
• A three-week training on UAV and Drones – Wings & Props, Hyderabad.
• A two-week training on IoT for UAVs – Veda Sri Chakra Technologies, Hyderabad.

Copy Rights

• “Solution for the One-Dimensional Wave Equation” -06/12/2024
• “Transform The Algebraic Grid to Elliptic Grid” -29/10/2024
• To evaluate Temperature distribution due to heat conduction in a composite material over a given time period and plot it. – 29/10/2024

Consultancy Projects

• “Development of Single cot”- VR Engineering Works (3 Months Duration) estimated cost Rs.147500

Seed Money Received

• “Modular Design Approach for Quick Assembly of UAV Components”- Rs.1,00,000.

List of FDPs Attended

• Design Thinking for Next Generation AI Solutions – 17/11/2025 to 22/11/2025, conducted by AICTE Training and Learning (ATAL) Academy, Gurukula Kangri Vishwavidyalaya, Haridwar
• Reimagining Media Education: The Role of Artificial Intelligence in Transforming Educational Practices- 07/07/2025 to 13/07/2025, Sri Ramswaroop Memorial University.
• “Unmanned Air Vehicles and Drone Technology” at Maturi Venkata Subba Rao Engineering College from 27/01/2025 to 01/02/2025.
• “DevOps for Cloud Native Development: Containers, Kubernetes and CI/CD Pipelines” at Sri Venkateshwara College of Engineering and Technology from 03/02/2025 to 08/02/2025
• “3D Printing and Design for Academicians & Entrepreneur” from 21-06-2021 to 25-06-2021 conducted by AICTE Training and Learning (ATAL) Academy at S R Engineering College.
• ” Fundamentals of Electric Vehicle Technology” from 06/12/2021 to 10/12/2021 conducted by AICTE Training and Learning (ATAL) Academy at IIIT Bhagalpur.
• “Technology-Based Entrepreneurship Development Program on Drones”-24 July-19 Aug 2023, Aero MLRIT.
• “AUTODESK-FUSION 360” – organized by Malla Reddy College of Engineering and Design Labs from 10/11/2023 to 15/11/2023.
• Development of Drones – 25/04/2024 to 30/04/2024 organized by Dept of Aero, IARE.

Internships

• A two-week training on Drone Design and its Parameters – Wings and Props, Hyderabad.
• A three-week training on UAV and Drones – Wings & Props, Hyderabad.
• A two-week training on IoT for UAVs – Veda Sri Chakra Technologies, Hyderabad.

Patents Published

• Layered Transforming Wing – (31/12/2021)
• RC Agrobot – (28/01/2022)
• Water-Can with Mouth-Piece – (01/11/2024)
• Composite-Based Stitched Foam Sandwich Structure. (09/12/2022)
• Thrust Measuring Bed – (01/08/2025s)
• Greenhouse Monitoring and Automated Intervention System (19/12/2025)
• Method to Rescue Child from Borewell – (04/02/2022)
• Method to use Survey Drones for Agricultural Land – (04/02/2022)

Subjects Taught

Books Published

–